lilliput-667GL-lcd-field-monitor
LILLIPUT 667GL 7″ HD LCD Field Monitor
| Display Screen | ||
| Panel Size | 7″ TFT LCD monitor No Touchscreen | |
| LED Backlight | YES | |
| Aspect Ratio | 16:9 | |
| Display Ratio | 16:9 or 4:3 adjustable | |
| Image Flip | Vertical flip and Horizontal flip | |
| Resolution | 800×480 | |
| Brightness | 450cd/㎡ | |
| Contrast | 500:1 | |
| Viewing Angle | 120°/ 140°(H/V) |
| Interface | ||
| HDMI input | Supports MAX 1080p ( 1920*1080p ) and 1080i( 1920*1080i)Compatible with Devices with HDMI or mini HDMI output such as Canon 5D mark II,Canon 7D,Nikon D300S and D3S and so on . | |
| YPbPr input | Supports MAX 1080p ( 1920*1080p ) and 1080i( 1920*1080i) automatically compatible with PAL/NTSC video. | |
| AV input | Two video input and one audio input | |
| HD-SDI | (optional,$605 more) Both Input & Output(the monitor can also transfer SDI signal to the second monitor while receiving SDI signal from a DSLR or Camcorder)Supports SD/HD/3G, but does not support Frequency less than 50HZ. | |
| XLR DC connector | you can power your monitor from your DV |
| Others | ||
| OSD Languages | English, Chinese(2 available) | |
| Input Voltage | DC 12V | |
| Current | 650mA (1.2A when charging) | |
| Standby Current | ≤50mA | |
| Power Consumption | ≤8W | |
| Input Resistance | 75Ω | |
| Input Frequency | H/30-60KHz,V/60-75Hz | |
| Audio Output | ≤1W | |
| Speaker | ×1(front) | |
| Weight | 542g / 582g (with sun shade) |
May 5, 2011 at 2:21 pm
My 7″ 667 works fine BUT I can NOT get the camera info to show on screen. SO, I have to have the little camera open ( wasting battery) to know if camera is recording , what mode and etc…
any ideas/
May 28, 2011 at 2:27 am
Yes, you can make the infomation display on 667GL, but it depends on your camera. For example, CANON 5D, Please press the button “info” on CANON 5D to display the information, and press “info” again to make it disappear.